hmf

The O2 Weld-In Bungs from HMF works with high-end after-market exhaust systems. These bungs are made from Stainless Steel and fit standard bosch O2 sensors.  Fitting Bung, Weld-In Oxygen Sensor Stainless-Steel 12mm

The 12mm O2 Cap from HMF works when using an O2 simulator and the O2 port on the pipe needs closed.  The  12mm O2 Cap is plated and has a 12mm x 1.25 Thread size. Oxygen Sensor Cap Plated 6mm Allen 12mm x 1.25...

Made from high-quality stainless steel, this bung adapter screws into an 18mm bung for use with some 12mm narrow-band O2 sensors.  Outside thread is M18x1.5 and the inside thread is M12x1.25. Go from 18mm to 12mm bung size Outside Thread: M18 x 1.5 Inside...

The O2 Weld-In Bungs from HMF work specifically for our high-end exhaust systems These bungs are made from Stainless Steel and fit standard bosch O2 sensors.  Fitting Bung, Weld-In Oxygen Sensor Stainless Steel 18mm

The HMF HD Front Bumper for the Can-Am® Maverick Sport is built from .095" steel tubing and offers an increased form of protection. The bumper itself adds an incredible look to the front of the machine.    Features: Built from .095" steel tubing Weighs approximately 24lbs. Holes...

The HMF Rear Bumper for the Can-Am® Maverick Sport is constructed from .095” wall steel tubing and powder coated for the ultimate protection on the rear of the Can-Am® Maverick Sport. The rear bumper easily mounts to the frame of the vehicle and provides the strength...

The HMF Accessory Clamp for the Can-Am® Maverick X3 installs on the stock Maverick X3 frame for mounting lights, fire extinguishers, and other accessories.  The mounting hole accepts a standard 8mm bolt size.  The Billet Accessory Clamp is a 1.85" two-piece clamp that's machined...

The HMF Glove Box Panel for the Can-Am Maverick X3 adds a glove box to the center console of the X3.  Installing the 1/16" Aluminum Side Panels will finally give the driver an easy-to-reach glove box while giving an enclosure for some aftermarket radios...

The HMF Gusset Kit is designed to reinforce the factory A-Arm mounting points on the Can-Am® Maverick X3.  Made from 1/8" Mild Steel, the HMF Gusset Kit can easily be bolted on with the stock hardware.  It's important to note that this Gusset Kit...

The HMF HD: Front Bumper for the Can-Am® Maverick X3 is built from .095" steel tubing and offers an increased form of protection. The HD bumper can house most winches up to 4,500lbs.  The bumper works with UTV fairleads that have 6" mounting hole spacing.  LED Lights and a UTV Fair...

The HMF Pull Plate for the Can-Am® Maverick X3 is designed to add strength and rigidity to the Rear Frame and Mounting Points of the Radius Rods.  Powdercoated black, the plate is built from 3/16" thick steel with the pull hook from 1/4" thick...

The HMF Rear Bumper for the Can-Am® Maverick X3 is constructed from .095” wall steel tubing and powder coated for the ultimate protection on the rear of the Can-Am® Maverick X3. The rear bumper easily mounts to the frame of the vehicle and provides the strength and protection to...

The HMF Rear Cargo Rack for the Can-Am® Maverick X3 is a functional addition to the X3 rear.  The rack acts as a tailgate that allows you to strap down and carry cargo from one destination to another.  It's constructed from lightweight aluminum, features a whip/flag...

The HMF™ Slip-On (Muffler Delete) exhaust system for the Can-Am® Maverick X3 is a no core slip-on system that sounds loud and angry.  It utilizes the stock end cap, turbo and the downpipe heatshield.  Cerakoted™ Black, the Slip-On system picks up 2-3 more horse...

The Can-Am® Maverick X3 exhaust systems are available in various different systems. Dual Full Turbo-Back System in the Performance and Titan Series, a Single Full Turbo-Back Big Core in the Performance and Titan-SS Series, and a Slip-On style Muffler Delete.The Dual Full Turbo-Back Systems...

The single 5” Stainless Steel silencer and unrestricted 2.5” downpipe was designed and built for serious racing and enthusiasts alike.  The silencer uses a 2.5” core to match the downpipe and minimizes back pressure on the turbo and helps to keep the turbo spooled...

The Can-Am® Maverick X3 exhaust systems are available in various different systems. Dual Full Turbo-Back System in the Performance and Titan Series, a Single Full Turbo-Back Big Core in the Performance and Titan-SS Series, and a Slip-On style Muffler Delete.The Dual Full Turbo-Back Systems...

The single 5” Stainless Steel silencer and unrestricted 2.5” downpipe was designed and built for serious racing and enthusiasts alike.  The silencer uses a 2.5” core to match the downpipe and minimizes back pressure on the turbo and helps to keep the turbo spooled...

BIG CORE (TURBO BACK) IS SIDE-MOUNTED. DUAL FULL (TURBO BACK) IS CENTER-MOUNTED The Can-Am® Maverick X3 exhaust systems are available in various different systems. Dual Full Turbo-Back System in the Performance and Titan Series, a Single Full Turbo-Back Big Core in the Performance and...

The Can-Am® Maverick X3 exhaust systems are available in various different systems. Dual Full Turbo-Back System in the Performance and Titan Series, a Single Full Turbo-Back Big Core in the Performance and Titan-SS Series, and a Slip-On style Muffler Delete.The Dual Full Turbo-Back Systems...